|Machine Body Material||Stainless Steel|
|Cladded Material||SS Sheets|
|Inlet Temperature||23-45 Degree C|
a leading manufacturers of process equipments now present Bakery Shortening Plant for processing bakery shortening. The plant will be capable of producing upto 1,000 kgs/hour when cooling from an inlet temperature of 45to 23/25 C suitable for semi-liquid filling into cans.
The capacity is dependant upon product formulations and inlet temperature of the product to be processed.
THE PLANT CONSISTS OF THE FOLLOWING
- Essessprocessor-Heat transfer cylinder assembly.
- Crystal distribution cum stablizer.
- Triplex plunger reciprocating pump.
- Nitrogen gas purging system.
- Interconnecting product pipeline.
- Control panel.
Two numbers of interconnected Esessprocessr consisting of a single horizontal heat transfer cylinder assembly mounted on an open frame. The cylinder is jacketed and lagged for use with glycol soution. The removable heat transfer cylinder will be internally hard chrome plated. The Essessprocessor shaft is concentrically mounted within the cylinder and has four diametrically opposed rows of floating type scraper blades and is driven by suitable motor hoseprof to IP55 standard via belts and pulleys suitably grarded.
All the product contact parts are made of stainless steel AISI 304 materials. The scraping blades, seal parts and 'O' rings will be copatible with the product. The frame and external product non-contact parts are in carbon steel and finished painted with metallic paint.
Two numbers of heafers are provided for heating of the producct in case of product solificstion inside the product cylinder during power failure or production stoppage.
Essessprocessor chilling jacket is suitably insulated for eliminating heat loss and cladded with stainless steel sheets for maintaining utmost hygiene.2.CRYSTAL DISTRIBUTION CUM STABLIZER
Horizontally mounted and sequentially connected to the two number of Essessprocessors mentiioned above. The cylinder has two rows of fixed pins at 180 with a concentric shaft carrying pins in a helical arrangement which intermesh with fixed pins while rotating. driven through a gear box and a suitable motor hose proof to IP 55.3. TRIPLEX PLUNGER RECIPROCATING PUMP
Triplex model single acting reciprocating plunger pump is used for feeding the product to the system. The capacity of the pump is 1,690 litres /hour driven by a suitable motor hose proof to IP 55. All product contact parts are of stainless steel AISI 304 / 316 materials and the product handling compartment is suitably jacketed for hot water / steam circulation for melting the product.4. NITROGEN PURGING SYSTEM
This consists of pressure regulating valve for regulating the line pressure with two numbers gauges for reading the line pressure as well as cylinder pressure. This system has flowmeter with flow regulating valve for adjusting the required amount of gas to be mixed with the products.5. INTERCONNECTING PRODUCT PIPELINE.
The interconnecting producct pipeline is jacketed for heating in case of producct being solidified inside the pipeline. Further each section of the producct pipeline is interconnected suitably for continuous heating of the entire length of product pipeline.6. CONTROL PANEL
This control panel not only enables smooth and trouble free handling of the product but also ensures safe operation of the plant. The unique design features of the control panel prevents mishandling of the plant thereby avoiding costly damages.